Shields 200 Series Exhaust / Water Hose, No Wire, By The Foot, 1" to 8" ID

Shields 200 Series Marine Exhaust & Water Hose without reinforcement wire is designed for use 1n boat wet exhaust and engine water line systems. 200 series hose meets SAE J2006. Shields 200 Series uses premium fabric reinforcement.

• Meets SAE J2006
• Temperature Range: -20 Deg. to +200 Deg. F continuous and 250 Deg. F intermittent
• Hose to be used in marine water and wet exhaust applications
• Use where wire support is unnecessary
• Heavy wall construction reinforced with 2 plies of tough synthetic spiral cord (4 piles in hose over 8" dia.)
• 3" Max Length is 12' -- can be cut in half to go UPS/FedEx -- Call for cuts.

Note: Enter number of feet desired in the "Qty" box

 

Hose over 2" diameter or over 6' may require freight shipping and/or a bulk order of 25' roll.

Note: These hoses are cut to customer length and are Not Returnable. Please .
For larger quantities or large diameter hose a freight quote may be required due to shipping restrictions. Our shipping Department will contact you immediately if there is any issue.

Marine Exhaust / Water Hose is reinforced with 2 or 4 plies of synthetic cord and is made of black, heavy-walled synthetic rubber. This hose is primarily used for straight connections in wet exhaust systems and engine water circulation lines. It is resistant to engine heat, exhaust fumes, ozone, mild chemicals, antifreeze and saltwater. This hose also has double the ozone resistance required by SAEJ2006. The temperature ranges from -20 Deg. F to +200 Deg. F continuous, +250 Deg. F intermittent. The hose meets SAE J2006 Type R1 standards.